Equation-Oriented Meanline Method for Axial Turbine Performance Prediction Under Choking Conditions

2024-9-30

CONCEPTUAL ANALYSIS ON THE IMPACT OF ACOUSTIC LINERS IN FAN FLUTTER

2024-9-30

Insights Into Turbocharger Centrifugal Compressor Stability Using High-Fidelity CFD and a Novel Impeller Diffusion Factor

2024-9-30

Assessment of Additive Manufactured Micro-Channel Characteristics: Impact of Hydraulic Diameter Evaluation

2024-9-25

Spectral Heat Transfer Coefficient (SHTC) for Thermal Design Analysis - Part 2: Leveraging Diabatic Wall Conditioning for Nonlinear Regime

2024-9-25

A Simplified Injection Model for Variable Area Turbine Fluidic Throttling

2024-9-25

Spectral Heat Transfer Coefficient (SHTC) for Thermal Design Analysis - Part 1: Augmenting the Cooling Law for Non-isothermal Wall

2024-9-25

IMPACTS OF MATERIAL AND MACHINE ON THE VARIATION OF ADDITIVELY MANUFACTURED COOLING CHANNELS

2024-9-18

Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs

2024-9-18

IMPACT OF THE WALL-PARALLEL LENGTH SCALE OF ROUGHNESS ON THE DEVELOPMENT OF TURBULENT BOUNDARY LAYERS IN TURBINES

2024-9-18

FLOW AND HEAT TRANSFER IN A RIBBED CONVERGING-DIVERGING U-DUCT UNDER ROTATING AND NON-ROTATING CONDITIONS

2024-9-18

DEVELOPMENT OF AN ADDITIVELY MANUFACTURED STATIONARY DIFFUSION SYSTEM FOR A RESEARCH AEROENGINE CENTRIFUGAL COMPRESSOR

2024-9-16

GEOMETRIC AND FLOW CHARACTERIZATION OF ADDITIVELY MANUFACTURED TURBINE BLADES WITH DRILLED FILM COOLING HOLES

2024-9-16

IMPACT OF BLOWING AND DENSITY RATIO ON THE FILM COOLING AND HEAT TRANSFER IN AN AGGRESSIVE TURBINE CENTER FRAME

2024-9-16

Influence of Dilution and Effusion Flows in Generating Variable Inlet Profiles for a High-Pressure Turbine

2024-9-13

Investigating the unsteady dynamics of a multi-jet impingement cooling flow using large eddy simulation

2024-9-11

The matching mechanism and flow mechanisms of supersonic through-flow variable-pitch tandem cascade

2024-9-11

An Experimental Study on the Effects of Non-Uniform Vane Spacing on Forced Response Reduction in a Mistuned Rotor Blisk in a Multistage Axial Compressor

2024-9-10

An Analytical Study on the Effects of Non-Uniform Vane Spacing on Forced Response Reduction in a Mistuned Blisk Rotor in a Multistage Axial Compressor

2024-9-6

Aerodynamic Performance Prediction for Wide-Incidence Turbines Using Graph Neural Network Models Driven by Small-Scale Experimental Data

2024-9-3

RANS Capabilities for Transonic Axial Compressor: A Perspective from GPPS CFD Workshop

2024-9-3

IMPACT OF TURBINE-STRUT CLOCKING AND TURBINE OUTLET SWIRL ON THE HEAT TRANSFER AND FILM COOLING IN AN AGGRESSIVE TURBINE CENTER FRAME

2024-8-30

Film superposition characteristics with laidback fan-shaped holes under the influence of internal crossflow

2024-8-22

CONVERGENCE ACCELERATION OF FAVRE-AVERAGED NON-LINEAR HARMONIC METHOD

2024-8-20

Understanding Unsteady Vortex Structure and Shedding Frequency of Cylindrical Hole Film Cooling: Insights from Experimental and Numerical Approaches

2024-8-20

GUIDELINE FOR LARGE-SCALE ANALYSIS OF CENTRIFUGAL BLOWER USING WALL-RESOLVED LARGE EDDY SIMULATION

2024-8-20

Characteristics of Deterministic and Stochastic Unsteadiness of Trailing Edge Cutback Film Cooling Flows

2024-8-20

Aerothermal Performance of Slashface Leakage with Double Surface Angle Under Realistic Swirling Inflow

2024-8-20

Study on the Influence of Volute Throat Jet on Excitation Vibration Alleviation of Radial Turbine Blade

2024-8-20

Lessons learned from pandemic-driven remote learning and sustaining best practices in turbomachinery laboratory experiences

2024-8-20

Data-Driven Radial Compressor Design Space Mapping

2024-8-16

The Unsteady Shock-Boundary Layer Interaction in a Compressor Cascade – Part 3: Mechanisms of Shock Oscillation

2024-8-7

Investigation of the discharge coefficient for laidback fan-shaped holes on turbine blades under internal crossflow condition

2024-8-6

Flow mechanism study on the effect of controllable speed casing with different axial starting points on transonic compressor rotor stability

2024-8-2

An investigation of secondary cooling effect on the endwall surface with vane trailing edge coolant injection

2024-8-2

Effects of Ribbed Crossflow Channel in a Turbine Blade on Film Cooling Performance of Diffusion Slot Holes with Various Cross-Section Orientations

2024-8-2

Resolvent Analysis for Subsonic Compressor with Impedance Boundary Condition Casing Treatment

2024-8-2

ON THE DEVELOPMENT OF HIGH LIFT, HIGH WORK LOW-PRESSURE TURBINES

2024-7-16

EXPERIMENTAL INVESTIGATIONS ON AEROELASTIC STABILITY OF COMBINED PLUNGE-PITCH MODE SHAPES IN A LINEAR COMPRESSOR CASCADE

2024-7-15

AERODYNAMIC IMPACT OF SECONDARY AIR INJECTION FLOWRATES ON THE MAIN ANNULUS FLOW FIELD FOR A TRANSONIC HIGH-PRESSURE TURBINE STAGE

2024-7-9

Vortex Lattice Method investigation of Tip-leakage flow

2024-7-3

The Effect of Unsteady Inlet Boundary Conditions on the Aero-Thermal Behavior of High-Pressure Turbine Vanes - a Numerical Study Using Scale Resolving Simulations

2024-7-1

Enhancing Aerodynamic Performance of a Non-Axisymmetric Endwall Contoured Cascade Through Section Profiling Method

2024-7-1

Investigation on the flow and heat transfer characteristics in a multi-pass channel using MRV and transient TLC

2024-6-25

Pragmatic Prediction Model of Droplet Trajectory in a Turbine Cascade

2024-6-24

Considerations for Compressible Film Cooling: A Computational Study of The Effects of Transonic Flows and Varying Mainstream Mach Number

2024-6-18

A SUPERPOSITION TECHNIQUE FOR PREDICTING OVERALL EFFECTIVENESS WITH MULTIPLE SOURCES OF INDIVIDUALLY CHARACTERIZED INTERNAL AND EXTERNAL COOLANT FLOWS

2024-6-17

Boundary Layer Analysis of a Transonic High-Pressure Turbine Vane Using Ultra-Fast-Response Temperature-Sensitive Paint

2024-6-14

Large Eddy Simulation of Laminar and Turbulent Shock/Boundary Layer Interactions in a Transonic Passage

2024-6-12

Numerical Investigation of Flow Evolution in Centrifugal Compressors During Surge

2024-6-12